About Us

At Zilac we Insure to Provide Pure and Fresh Milk that why

a few hours of being collected. In the United States, there are several hundred thousand dairy farms and several thousand milk processing plants. Some plants produce only fluid milk, while others also produce butter, cheese, and other milk products.

Collecting

• 1 Dairy cows are milked twice a day using mechanical vacuum milking machines. The raw milk flows through stainless steel or glass pipes to a refrigerated bulk milk tank where it is cooled to about 40° F (4.4° C).
• 2 A refrigerated bulk tank truck makes collections from dairy farms in the area within a few hours. Before pumping the milk from each farm’s tank, the driver collects a sample and checks the flavor and temperature and records the volume.
• 3 At the milk processing plant, the milk in the truck is weighed and is pumped into refrigerated tanks in the plant through flexible stainless steel or plastic hoses.

Separating

• 4 The cold raw milk passes through either a clarifier or a separator, which spins the milk through a series of conical disks inside an enclosure. A clarifier removes debris, some bacteria, and any sediment that may be present in the raw milk. A separator performs the same task, but also separates the heavier milk fat from the lighter milk to produce both cream and skim milk. Some processing plants use a standardizer-clarifier, which regulates the amount of milk fat content in the milk by removing only the excess fat. The excess milk fat is drawn off and processed into cream or butter.

Fortifying

• 5 Vitamins A and D may be added to the milk at this time by a peristaltic pump,
  

  

  A clarifier removes debris, some bacteria, and any sediment that may be present in the raw milk. The milk is then fortified and pasteurized.

  which automatically dispenses the correct amount of vitamin concentrate into the flow of milk.

Pasteurizing

• 6 The milk—either whole milk, skim milk, or standardized milk—is piped into a pasteurizer to kill any bacteria. There are several methods used to pasteurize milk. The most common is called the high-temperature, short-time (HTST) process in which the milk is heated as it flows through the pasteurizer continuously. Whole milk, skim milk, and standardized milk must be heated to 161° F (72° C) for 15 seconds. Other milk products have different time and temperature requirements. The hot milk passes through a long pipe whose length and diameter are sized so that it takes the liquid exactly 15 seconds to pass from one end to the other. A temperature sensor at the end of the pipe diverts the milk back to the inlet for reprocessing if the temperature has fallen below the required standard.

Homogen izing

• 7 Most milk is homogenized to reduce the size of the remaining milk fat particles. This prevents the milk fat from separating and floating to the surface as cream. It also ensures that the milk fat will be evenly distributed through the milk. The hot milk from the pasteurizer is pressurized to 2,500-3,000 psi (17,200-20,700 kPa) by a multiple-cylinder piston pump and is forced through very small passages in an adjustable valve. The shearing effect of being forced through the tiny openings breaks down the fat particles into the proper size.
• 8 The milk is then quickly cooled to 40° F (4.4° C) to avoid harming its taste.

Packaging

• 9 The milk is Filled in Clear and Sanitized Glass Bottle to insure its Safety and Ready to Deliver at your Doorstep.

Cleaning

• 11 To ensure sanitary conditions, the inner surfaces of the process equipment and piping system are cleaned once a day. Almost all the equipment and piping used in the processing plant and on the farm are made from stainless steel. Highly automated clean-in-place systems are incorporated into this equipment that allows solvents to be run through the system and then flushed clean. This is done at a time between the normal influx of milk from the farms.

Quality Control

The federal Food and Drug Administration (FDA) publishes the Grade A Milk Ordinance which sets sanitation standards for milk production in most states and for all interstate milk shippers. The composition of milk and milk products is specified in Agricultural Handbook 52 published by the United States Department of Agriculture. It lists both federal and state standards. Testing of milk products includes tests for fat content, total solids, pasteurization efficiency, presence of antibiotics used to control cow disease, and many others.